简体 | 繁體 | FastenerExpo |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe
All Categories

Click Specification

Unit:inch

Lockwasher Dimensions Inch Design Series W-00 and W-000

ANSI /ABMA 8.2 - 1999

Display drawing:

美标ANSI /ABMA8.2 - 1999 ANSI8.2 8.2ANSI Lockwasher Dimensions Inch Design Series W-00 and W-000
美标ANSI /ABMA8.2 - 1999 ANSI8.2 8.2ANSI Lockwasher Dimensions Inch Design Series W-00 and W-000
Part No.
W-00 W-01 W-02 W-03 W-04 W-05 W-06 W-07 W-08 W-09 W-10 W-11 W-12 W-13 W-14
R min (inch)
max (inch)
E min (inch)
B max (inch)
x min (inch)
k max (inch)
s max (inch)
V min (inch)
T max (inch)
Q min (inch)
No. of Tangs
R min (mm)
max (mm)
E min (mm)
B max (mm)
x min (mm)
k max (mm)
s max (mm)
V min (mm)
T max (mm)
Q min (mm)
0.406 0.484 0.601 0.679 0.801 0.989 1.193 1.396 1.583 1.792 1.992 2.182 2.400 2.588 2.791
0.421 0.499 0.616 0.694 0.816 1.009 1.213 1.416 1.603 1.817 2.017 2.207 2.425 2.613 2.816
0.655 0.749 0.843 0.968 1.155 1.311 1.530 1.843 2.030 2.311 2.468 2.686 2.874 3.093 3.343
0.875 1.016 1.156 1.328 1.531 1.719 1.922 2.250 2.469 2.734 2.922 3.109 3.344 3.578 3.828
0.334 0.412 0.529 0.607 0.729 0.909 1.093 1.296 1.478 1.687 1.887 2.069 2.267 2.455 2.658
0.195 0.236 0.297 0.337 0.394 0.494 0.594 0.693 0.784 0.886 0.986 1.085 1.187 1.286 1.385
0.120 0.120 0.120 0.120 0.176 0.176 0.176 0.176 0.290 0.290 0.290 0.290 0.290 0.290 0.290
0.062 0.062 0.062 0.062 0.062 0.094 0.094 0.094 0.094 0.125 0.125 0.125 0.125 0.125 0.188
0.120 0.120 0.120 0.120 0.166 0.166 0.166 0.166 0.234 0.234 0.234 0.234 0.234 0.234 0.234
0.032 0.032 0.032 0.032 0.032 0.040 0.040 0.040 0.048 0.048 0.048 0.053 0.053 0.053 0.053
9 9 11 11 11 13 13 15 15 17 19 19 19 19 19
10.31 12.29 15.27 17.25 20.35 25.12 30.30 35.46 40.21 45.52 50.60 55.42 60.96 65.74 70.89
10.69 12.67 15.65 17.63 20.73 25.63 30.81 35.97 40.72 46.15 51.24 56.06 61.60 66.37 71.53
16.64 19.02 21.41 24.59 29.34 33.30 38.86 46.81 51.56 58.70 62.69 68.22 73.00 78.56 84.91
22.23 25.81 29.36 33.73 38.89 43.66 48.82 57.15 62.71 69.44 74.22 78.97 84.94 90.88 97.23
8.48 10.46 13.44 15.42 18.52 23.09 27.76 32.92 37.54 42.85 47.93 52.55 57.58 62.36 67.51
4.95 5.99 7.54 8.56 10.01 12.55 15.09 17.60 19.91 22.50 25.04 27.56 30.15 32.66 35.18
3.05 3.05 3.05 3.05 4.47 4.47 4.47 4.47 7.37 7.37 7.37 7.37 7.37 7.37 7.37
1.57 1.57 1.57 1.57 1.57 2.39 2.39 2.39 2.39 3.18 3.18 3.18 3.18 3.18 4.78
3.05 3.05 3.05 3.05 4.22 4.22 4.22 4.22 5.94 5.94 5.94 5.94 5.94 5.94 5.94
0.81 0.81 0.81 0.81 0.81 1.02 1.02 1.02 1.22 1.22 1.22 1.35 1.35 1.35 1.35
Part No.
W-15 W-16 W-17 W-18 W-19 W-20 W-21 W-22 W-24 W-26 W-28 W-30 W-32 W-34 W-36
R min (inch)
max (inch)
E min (inch)
B max (inch)
x min (inch)
k max (inch)
s max (inch)
V min (inch)
T max (inch)
Q min (inch)
No. of Tangs
R min (mm)
max (mm)
E min (mm)
B max (mm)
x min (mm)
k max (mm)
s max (mm)
V min (mm)
T max (mm)
Q min (mm)
2.973 3.177 3.395 3.582 3.800 3.988 4.192 4.395 4.801 5.191 5.582 5.983 6.389 6.764 7.171
3.003 3.207 3.425 3.612 3.830 4.018 4.222 4.425 4.831 5.226 5.617 6.018 6.424 6.799 7.206
3.593 3.874 4.061 4.311 4.593 4.843 5.030 5.311 5.718 6.218 6.561 7.093 7.468 8.061 8.405
4.109 4.375 4.625 4.938 5.219 5.500 5.703 6.063 6.469 7.031 7.438 8.063 8.438 9.063 9.438
2.834 3.038 3.253 3.418 3.636 3.809 4.013 4.185 4.591 4.969 5.360 5.730 6.128 6.503 6.910
1.484 1.580 1.679 1.778 1.877 1.976 2.074 2.173 2.371 2.565 2.755 2.953 3.151 3.342 3.540
0.290 0.353 0.353 0.353 0.353 0.353 0.353 0.353 0.353 0.435 0.590 0.590 0.590 0.715 0.715
0.188 0.188 0.188 0.188 0.188 0.250 0.250 0.250 0.250 0.250 0.250 0.313 0.313 0.313 0.313
0.328 0.328 0.328 0.328 0.328 0.328 0.390 0.390 0.690 0.520 0.520 0.520 0.520 0.520 0.645
0.062 0.062 0.062 0.084 0.084 0.084 0.084 0.115 0.115 0.115 0.115 0.146 0.146 0.146 0.146
19 19 19 19 19 19 19 19 19 19 19 19 19 19 19
75.51 80.70 86.23 90.98 96.52 101.30 106.48 111.63 121.95 131.85 141.78 151.97 162.28 171.81 182.14
76.28 81.46 87.00 91.74 97.28 102.06 107.24 112.40 122.71 132.74 142.67 152.86 163.17 172.69 183.03
91.26 98.40 103.15 109.50 116.66 123.01 127.76 134.90 145.24 157.94 166.65 108.16 189.69 204.75 213.49
104.37 111.13 117.48 125.43 132.56 139.70 144.86 154.00 164.31 178.59 188.93 204.80 214.33 230.20 239.73
71.98 77.17 82.63 86.82 92.35 96.75 101.93 106.30 116.61 126.21 136.14 145.54 155.65 165.18 175.51
37.69 40.13 42.65 45.16 47.68 50.19 52.68 55.19 60.22 65.15 69.98 75.01 80.03 84.89 89.92
7.37 8.97 8.97 8.97 8.97 8.97 8.97 8.97 8.97 11.05 14.99 14.99 14.99 18.16 18.16
4.78 4.78 4.78 4.78 4.78 6.35 6.35 6.35 6.35 6.35 6.35 7.95 7.95 7.95 7.95
8.33 8.33 8.33 8.33 8.33 8.33 9.91 9.91 9.91 13.21 13.21 13.21 13.21 13.21 16.38
1.57 1.57 1.57 2.13 2.13 2.13 2.13 2.92 2.92 2.92 2.92 3.71 3.71 3.71 3.71
Part No.
W-38 W-40 W-44 W-022 W-024 W-026 W-028 W-030 W-032 W-034 W-036 W-038 W-040 W-044
R min (inch)
max (inch)
E min (inch)
B max (inch)
x min (inch)
k max (inch)
s max (inch)
V min (inch)
T max (inch)
Q min (inch)
No. of Tangs
R min (mm)
max (mm)
E min (mm)
B max (mm)
x min (mm)
k max (mm)
s max (mm)
V min (mm)
T max (mm)
Q min (mm)
7.577 7.982 8.701 4.395 4.801 5.191 5.582 5.983 6.389 6.764 7.171 7.577 7.982 8.701
7.612 8.017 8.736 4.425 4.831 5.226 5.617 6.018 6.424 6.799 7.206 7.612 8.017 8.736
8.811 9.186 9.905 4.951 5.363 5.753 6.159 6.738 7.144 7.538 7.929 8.320 8.804 9.600
9.875 10.313 11.438 5.688 5.188 5.625 7.094 7.719 8.156 8.594 9.000 9.438 9.969 10.406
7.316 7.121 8.327 4.185 4.591 4.969 5.360 5.730 6.128 6.503 6.910 7.316 7.121 8.327
3.738 3.930 / / / / / / / / / / / /
0.715 0.840 0.940 0.350 0.350 0.469 0.594 0.594 0.594 0.719 0.719 0.719 0.844 0.945
0.313 0.313 / / / / / / / / / / / /
0.645 0.645 0.878 0.390 0.390 0.390 0.390 0.520 0.520 0.520 0.520 0.520 0.645 0.770
0.146 0.146 0.146 0.115 0.115 0.115 0.115 0.115 0.115 0.115 0.115 0.115 0.115 0.115
19 19 19 19 19 19 19 19 19 19 19 19 19 19
192.46 202.74 221.01 111.63 121.95 131.85 141.78 151.97 162.28 171.81 182.14 192.46 202.74 221.01
193.34 203.63 221.89 112.40 122.71 132.74 142.67 152.86 163.17 172.69 183.03 193.34 203.63 221.89
223.80 233.32 251.59 125.76 136.22 146.13 156.44 171.15 181.46 191.47 201.40 211.33 223.62 243.83
250.83 261.95 290.53 144.48 157.18 168.28 180.19 196.06 207.16 218.29 228.60 239.73 253.21 264.31
185.83 196.11 211.51 106.30 116.61 126.21 136.14 145.54 155.65 165.18 175.51 185.83 196.11 211.51
94.95 99.82 / / / / / / / / / / / /
18.16 21.34 23.88 8.89 8.89 11.91 15.09 15.09 15.09 18.26 18.26 18.26 21.44 24.00
7.95 7.95 / / / / / / / / / / / /
16.38 16.38 22.30 9.91 9.91 9.91 9.91 13.21 13.21 13.21 13.21 13.21 16.38 19.56
3.71 3.71 3.71 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92 2.92
Send Inquiry

Similar Standards

1 Tab Washers For Round Nuts [GB]
GB 858 - 1988 		Tab Washers For Round Nuts

View Suppliers
2 Tab Washers With Long Tab And Wing [GB]
GB 855 - 1988 		Tab Washers With Long Tab And Wing

View Suppliers
3 External Tab Washers [GB]
GB 856 - 1988 		External Tab Washers

View Suppliers
4 Tab Washers With Long Tab [GB]
GB 854 - 1988 		Tab Washers With Long Tab

View Suppliers
5 Tab Washers With Long And Stort Tab At Right Angles [CNS]
CNS 4645 - 1983 		Tab Washers With Long And Stort Tab At Right Angles

View Suppliers
6 Tab Washers With Long Tab [CNS]
CNS 159 - 1994 		Tab Washers With Long Tab

View Suppliers
7 Rolling bearings - Lockwashers; Safety plate, Lockclip [DIN]
DIN 5406 - 2011 		Rolling bearings - Lockwashers; Safety plate, Lockclip
8 Lockwasher With Straight Inner Tab [ISO]
ISO 2982-2 - 2013 		Lockwasher With Straight Inner Tab
9 Lockwashers and locking plates for use with rolling bearings [DIN]
DIN 5406 - 1993 		Lockwashers and locking plates for use with rolling bearings
10 Tab Washers With Long And Short Tap At Right Angles [DIN]
DIN 463 - 1974 		Tab Washers With Long And Short Tap At Right Angles
11 Tab washers with long tab [DIN]
DIN 93 - 1974 		Tab washers with long tab
12 Lockwasher Dimensions Inch Design Series TW and WH [ANSI]
ANSI /ABMA 8.2 - 1999 		Lockwasher Dimensions Inch Design Series TW and WH
13 Captive C-washer [DIN]
DIN 6371 - 1999 		Captive C-washer
14 C-washer for jigs and fixtures [DIN]
DIN 6372 - 2002 		C-washer for jigs and fixtures
15 External tab washers (locking tab washers) [DIN]
DIN 432 - 1983 		External tab washers (locking tab washers)
16 Snap rings for slotted nuts to DIN 70851 [DIN]
DIN 70951 - 1968 		Snap rings for slotted nuts to DIN 70851
17 Rolling Bearings - Radial Bearings With Locating Snap Ring [ISO]
ISO 464 - 1995 		Rolling Bearings - Radial Bearings With Locating Snap Ring
18 Tab Washers For Slotted Round Nuts (Form A & Form B) [DIN]
DIN 70952 - 1976 		Tab Washers For Slotted Round Nuts (Form A & Form B)
19 Lockwasher With Bent Inner Tab [ISO]
ISO 2982-2 - 2013 		Lockwasher With Bent Inner Tab
20 Machine Tools; Internal Tab Washers For Slotted Round Nuts In Conformity With DIN 1804 [DIN]
DIN 462 - 1973 		Machine Tools; Internal Tab Washers For Slotted Round Nuts In Conformity With DIN 1804
21 Lockwasher with bent inner tab [JIS]
JIS B 1554 (AW) - 2016 		Lockwasher with bent inner tab
22 Rolling Bearings-Snap Ring [GB]
GB /T 305 - 2019 		Rolling Bearings-Snap Ring
23 Rolling Bearings-Snap Ring [GB]
GB /T 305 - 2019 		Rolling Bearings-Snap Ring
24 Lockwasher with straight inner tab [JIS]
JIS B 1554 (AW/AWL) - 2016 		Lockwasher with straight inner tab
25 Rolling bearings - Lockwashers - MBL Series [GB]
GB /T 9160.2 (MBL) - 2006 		Rolling bearings - Lockwashers - MBL Series
26 External tab washers [UNI]
UNI 6599 		External tab washers
27 Rolling bearings - Lockwashers - MBL Series [GB]
GB /T 9160.2 (MBL) - 2017 		Rolling bearings - Lockwashers - MBL Series
28 Rolling bearings - Lockwashers - Type MB、MBA [GB]
GB /T 9160.2 (MB) - 2006 		Rolling bearings - Lockwashers - Type MB、MBA
29 Lockwashers For Locknuts - Heavy Series [NF]
NF E 22-112 - 1969 		Lockwashers For Locknuts - Heavy Series
30 Rolling Bearings-Snap Ring [GB]
GB /T 305 - 1998 		Rolling Bearings-Snap Ring
31 Lockwasher with bent inner tab [JIS]
JIS B 1554 (AWL) - 2016 		Lockwasher with bent inner tab
32 Tab Washers With Long Tab [UNI]
UNI 6600 		Tab Washers With Long Tab
33 Rolling bearings - Lockwashers - Type MB/MBA [GB]
GB /T 9160.2 (MB/MBA) - 2017 		Rolling bearings - Lockwashers - Type MB/MBA
34 Push-on Spring Bolt Retainer (Inch series) [SAE]
SAE J 892 (F5) - 1996 		Push-on Spring Bolt Retainer (Inch series)
35 External Tab Washers [CNS]
CNS 160 - 1994 		External Tab Washers
36 Tab Washers For Round Nuts [CNS]
CNS 9569 - 1982 		Tab Washers For Round Nuts
37 Internal Tab Washers [CNS]
CNS 4254 - 1978 		Internal Tab Washers
38 Rectangular Lock Washers [CNS]
CNS 158 - 1994 		Rectangular Lock Washers